E 250 V8-5.4L (2008)
Parking Brake Cable: Procedures
Parking Brake Cable Tension Release
1. Release the parking brake.
2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
3. With an assistant, release the parking brake cable tension by pulling down on the intermediate cable at the cable-to-cable union until the parking
brake control sector rotates to its stop and a 4 mm (0.15 in) x 15 0 mm (5.9 in) retainer pin can be inserted.
4. Disconnect the cable at the cable-to-cable union.