E 250 V8-5.4L (2008)
1. Remove the flexplate.
2. Remove the engine rear cover plate.
3. Using the special tools, remove the crankshaft oil slinger.
^
Discard the crankshaft oil slinger.
4. Using the special tools, remove the crankshaft rear seal.
^
Discard the crankshaft rear seal.
Installation
1. NOTE: Lubricate the inner lip of the crankshaft rear seal with clean engine oil.
Using the special tools, install a new crankshaft rear seal.
2. Using the special tools, install a new crankshaft rear oil slinger.
