E 250 V8-5.4L (2008)
Evaporator Core: Service and Repair
Evaporator Core
EVAPORATOR CORE
Removal and Installation
NOTE: If an evaporator core leak is suspected, the evaporator core must be vacuum leak tested before it is removed from the vehicle.
All vehicles
1. Recover the refrigerant.
Vehicles with 4.6L, 5.4L or 6.8L engine
2. Remove the air cleaner assembly.
3. Remove the battery.
4. Remove the battery tray.
1
Remove the bolts.
2
Remove the battery tray.
-
To install, tighten to 28 Nm (21 lb-ft).
5. Remove the bolt and clamp and the oil filler tube.
-
To install, tighten to 9 Nm (80 lb-in).
6. Remove the 2 A/C condenser fitting nuts and disconnect the fittings.
-
Discard the O-ring seals and gasket seals.
-
To install, tighten to 15 Nm (11 lb-ft).