E 250 V8-5.4L (2008)
-
To install, tighten to 39 Nm (29 lb-ft).
20. Disconnect the high-pressure cutoff switch electrical connector
21. Disconnect the compressor suction line fitting.
1
Remove the suction accumulator outlet line bracket screw.
2
Remove the compressor suction line fitting nut and disconnect the fitting.
-
Discard the O-ring seal and gasket seal.
-
To install, tighten the fitting to 15 Nm (11 lb-ft).
-
To install, tighten the screw to 2 Nm (18 lb-in).
Vehicles with auxiliary A/C
22. Disconnect the suction accumulator fitting.
-
Discard the O-ring seals.
