E 250 V8-5.4L (2008)
Alignment: Service and Repair
Ride Height Measurement
Ride Height Measurement
Front Ride Height Measurement
Front Ride Height Measurement
NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full
tank of fuel.
1. To obtain front ride height, measure the distance between points A (jounce bumper flange) and B (top of the axle at the casting parting line).
Rear Ride Height Measurement
Rear Ride Height Measurement
NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full
tank of fuel.