E 250 V8-5.4L (2008)
Removal and Installation
1. WARNING:
-
When working on or near the evaporative emission (EVAP) system, disconnect the battery ground cable from the battery. The EVAP
system contains fuel vapor and condensed fuel vapor, so an electrical spark may cause a fire or explosion. Failure to follow this
instruction may result in serious personal injury.
-
Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly
flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
Disconnect the battery ground cable.
2. If necessary, remove the engine cover.
3. Disconnect the evaporative emission (EVAP) canister purge valve electrical connector and the EVAP fuel vapor tube quick connect couplings.
