E 250 V8-5.4L (2008)
Power Steering Fluid Cooler: Service and Repair
Power Steering Fluid Cooler
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may occur.
1. Remove the transmission fluid cooler.
2. Using a suitable suction device, remove the power steering fluid from the fluid reservoir.
3. Compress the clamp and disconnect the return hose.
4. Compress the clamp and disconnect the power steering cooler-to-reservoir return hose from the cooler.
5. Remove the 2 power steering fluid cooler bolts and the fluid cooler.
^
To install, tighten to 11 Nm (8 lb-ft).
6. To install, reverse the removal procedure.
^
Fill the power steering system.
