E 250 V8-5.4L (2008)
4. Remove the 2 power steering fluid reservoir bracket-to-cowl bolts.
^
To install, tighten to 14 Nm (10 lb-ft).
5. Remove the 2 power steering fluid reservoir bracket-to-radiator support bolts.
^
To install, tighten to 9 Nm (80 lb-inch).
6. Remove the 3 power steering fluid reservoir bolts and separate the bracket from the reservoir.
^
To install, tighten to 11 Nm (8 lb-ft).
All vehicles
7. Compress the clamp and disconnect the power steering cooler-to reservoir return hose.
8. Compress the clamp and disconnect the power steering pump supply hose.
9. Remove the power steering fluid reservoir.
10. To install, reverse the removal procedure.
^
Fill the power steering system.
