E 250 V8-5.4L (2008)
b. The on-center torque must be 2.5 to 7.0 lb-in (0.28 to 0.79 N.m) greater than the peak preload torque without exceeding a total of 19 lb-in (2.15
N.m).
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
100908A
2008-2010 Econoline
3.1 Hrs.
150/350: Includes Time To
Lubricate, Check And
Adjust Front End, Adjust
Front End Alignment If
Necessary; Set The On
Center Torque; And Road
Tests (Do Not Use With
Any Other Labor
Operations)
100908B
2008-2010 Econoline
3.9 Hrs.
150/350: Includes Time To
Lubricate, Check And
Adjust Front End, Adjust
Front End Alignment If
Necessary; Set The On
Center Torque; And Road
Tests, Set The On Center
Torque A Second Time
(Do Not Use With Any
Other Labor Operations)
100908C
2008-2010 Econoline 350
3.4 Hrs.
With Dual Rear Wheels:
Includes Time To
Lubricate, Check And
Adjust Front End, Adjust
Front End Alignment If
Necessary; Set The On
Center Torque; And Road
Tests (Do Not Use With
Any Other Labor
Operations)
100908D
2008-2010 Econoline 350
4.2 Hrs.
With Dual Rear Wheels:
Includes Time To
Lubricate, Check And
Adjust Front End, Adjust
Front End Alignment If
Necessary; Set The On
Center Torque; And Road
Tests, Set The On Center
Torque A Second Time
(Do Not Use With Any
Other Labor Operations)