E 250 V8-5.4L SOHC VIN L (2004)
2. Install the caliper pistons.
1
Install the piston seal.
2
Install the piston boot on the piston.
3
CAUTION: Be careful not to damage or dislodge the piston seal.
Insert the caliper piston.
4
CAUTION: Be careful not to cock the caliper piston.
Position the boot in the bore, and press the caliper piston into the bore.
5
Install the piston boot retainer.
3. Install the disc brake caliper.
E-150
Brake Caliper Anchor Plate-E-150
Removal and Installation
1. Remove the brake pads.
2. Remove the anchor plate bolts and remove the rear disc brake caliper anchor plate.
3. To install, reverse the removal procedure.
E-250, E-350
Brake Caliper Anchor Plate-E-250, E-350
Removal and Installation
1. Remove the brake pads.
2. Remove the anchor plate bolts and remove the rear disc brake caliper anchor plate.