E 250 V8-5.4L SOHC VIN L (2004)
Brake Master Cylinder: Service and Repair
Removal and Installation
Brake Master Cylinder
Removal and Installation
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
1. Disconnect the battery.
2. Use a suitable suction device to remove the brake fluid from the brake master cylinder reservoir.
3. Disconnect the speed control deactivator switch connector.
4. Disconnect the brake fluid level switch electrical connector.