E 250 V8-5.4L SOHC VIN L (2004)
5. Install the camshaft sprocket.
1. Install the sprocket.
2. Install and tighten the bolt.
^
Tighten in two stages.
^
Stage 1: Tighten to 40 Nm (30 ft. lbs.).
^
Stage 2: Tighten an additional 90 degrees.
Windsor engine (SAL)
6. Install the camshaft and the camshaft bearing caps in their original locations.
^
Lubricate the camshaft bearing caps with clean engine oil.
^
Position the camshaft bearing caps.
^
Install the bolts loosely.
