E 250 V8-5.4L SOHC VIN L (2004)
Intake Manifold: Service and Repair
Part 1 of 2
Intake Manifold-5.4L
Removal
1. Disconnect the battery ground cable.
2. Remove the interior engine cover.
3. Disconnect the fuel hose spring lock couplings.
4. Drain the cooling system.
5. Position the engine air cleaner (ACL).
1. Remove the four bolts.
2. Loosen the clamp.
3. Position the ACL to gain access to the mass airflow (MAF) sensor electrical connector.
6. Disconnect the MAF sensor electrical connector and remove the ACL.
7. Disconnect the two hoses.
