E 250 V8-5.4L SOHC VIN L (2004)
9. NOTE: Passenger seat shown.
Remove the inboard side shield screws from underneath the seat.
10. NOTE: Passenger seat shown.
Rotate the inboard side shield upward to disengage the front and center upper hooks.
-
Pull the inboard side shield away to clear the belt and buckle.
11. NOTE: Passenger seat shown.
Remove the inboard side shield.
1
Rotate the inboard side shield upward to release the rear pin-type retainer mount from the key slot.
2
Hold the inboard side shield in one hand and release the retaining clips holding the belt and buckle assembly pretensioner boot to the inboard
side shield.
3
Remove the inboard side shield.
All vehicles
12. Remove the rear pushpin retainer from the inboard side shield.
-
Replace the pin-type retainer if damaged during removal.