E 250 V8-5.4L SOHC VIN L (2004)
Seat Belt Height Adjuster: Service and Repair
Removal and Installation
HEIGHT ADJUSTER - SHOULDER SAFETY BELT
Torx Bit, Safety Belt Bolt
SPECIAL TOOL(S)
REMOVAL
1. NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or if it does not remain closed,
install a new shoulder safety belt guide. Remove the front shoulder safety belt guide cover.
2. Remove the shoulder safety belt guide.
1
Remove the shoulder safety belt guide nut.
2
Remove the shoulder safety belt guide.
3. On the driver side, remove the body side trim finish panel and the front upper body side trim panel.
4. On the passenger side, remove the center body pillar upper trim panel.