E 250 V8-5.4L SOHC VIN L (2004)
Tie Rod End: Service and Repair
Outer
Tie Rod End - Outer
Special Tool(s)
Removal
1. Raise and support the vehicle.
2. Remove the tie rod end castellated nut.
1
Remove the cotter pin.
2
Remove the nut.
3. Using the Pitman Arm Puller, remove the tie rod end ball stud from the front wheel spindle.
4. Remove the tie rod end.
1
Loosen the bolts on the tie rod adjusting sleeve clamp.