E 250 V8-5.4L SOHC VIN L (2004)
3. CAUTION: Make sure that the pump bore is clean and the old filter seal has been removed.
NOTE: Prior to installation, lightly lubricate the seal with clean automatic transmission fluid.
Press the fluid filter and seal assembly into the pump bore until seated.
4. NOTE: Do not discard the gasket unless damaged. This is a reusable gasket.
NOTE: Apply a light coat of petroleum jelly to hold the gasket to the fluid pan.
Position the gasket onto the clean fluid pan. Make sure the magnet is positioned over the dimple in the fluid pan.
5. CAUTION: Mixing the 4x2-style and 4x4-style transmission fluid filters and transmission pan assembly components can cause transmission
damage.
Install the correct pan with gasket for this application. Alternately tighten the bolts.
Vehicles equipped with a fluid pan drain plug