E 250 V8-5.4L SOHC VIN L (2004)
7. CAUTION: Do not damage the wheel bearing oil seal.
Remove the axle shaft.
Installation
1. Lubricate the lip of the wheel bearing oil seal with grease.
2. CAUTION: Do not damage the wheel bearing oil seal.
Install the axle shaft.
3. CAUTION: Do not damage the rubber O-ring in the U-washer groove.
Install the U-washer.
1. Position the U-washer in the groove of the axle shaft.
2. Pull the axle shaft outward.