E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
NOTE
FOR BI-FUEL CNG APPLICATIONS THE 45 DEGREE FITTING SUPPLIED IN THE KIT MUST BE INSTALLED. ORIENTATE THE 45
DEGREE FITTING SO THAT IT ANGLES AWAY FROM THE FILL DOOR BODY FLANGE (FIGURE 2). TORQUE FITTING TO 47-52 N.m
(30-40 LB-FT) (FIGURE 1).
2.
Install Fuel Fill Valve into mounting flange. Torque retaining nut to 35 N.m (20-30 lb-ft) (Figure 1).
3.
Install the high-pressure fuel line to the fuel filler valve. Torque fuel line retaining nut to 38-57 N.m (28-42 lb-ft).
4.
Install tether loop and dust cap over end of fill valve above flange retaining nut (Figure 1).
5.
Leak check only the fittings removed for Fill Valve Replacement.
