E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
5. Working through the access hole, remove the window regulator electric drive bracket from the inner panel.
-
Rotate to gain access to the three screws retaining the window regulator electric drive to the bracket and cable drum housing.
6. Remove the screws and separate the window regulator electric drive from the bracket and cable drum.
7. Remove the window regulator electric drive.
INSTALLATION
1. Follow the removal procedure in reverse order.
-
Use the Heavy Duty Riveter D80L-23200-A or equivalent to install rivets.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control
module relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
