E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
Grease Seal
2. For installation of a new front disc brake hub and rotor or if replacing the front wheel bearings, install the inner front wheel bearing and a new
grease seal, using Seal Replacer.
Front Disc Brake Hub And Rotor
3. Install the front disc brake hub and rotor.
1
Position the front disc brake hub and rotor on the front wheel spindle.
CAUTION: Without the spindle nut installed, the front disc brake hub and rotor can slide off the front wheel spindle.
2
Install the outer front wheel bearing, the front wheel outer bearing retainer washer and the spindle nut.
4. While rotating the front disc brake hub and rotor, tighten the spindle nut.
5. Loosen the spindle nut two turns.
