E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
Front Crankshaft Seal: Service and Repair
REMOVAL
1. Remove the engine cooling fan and fan shroud.
2. Remove the drive belt.
3. Raise and support the vehicle.
4. Remove the crankshaft pulley bolt.
5. Using the Crankshaft Damper Remover, remove the crankshaft pulley.
6. Use the (A) Front Cover Seal Remover to remove the (B) crankshaft front seal.
INSTALLATION
1. Lubricate the (A) engine front cover seal bore and the (B) crankshaft front seal inner lip.
^
Use SAE 50W engine oil meeting Ford specification WSE-M2C908-A1.
