E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
28. Install the power steering pump.
^
Position the power steering pump.
^
Install the power steering bolts.
NOTE: Only 3 bolts are required for installation.
29. Install the oil drain plug securely.
30. Lower the vehicle.
31. Install the water pump.
32. Connect the camshaft position (CMP) sensor electrical connector.
33. Install the cam covers.
34. Install the radiator and fill the cooling system.
35. Fill the engine with oil.
^
Use engine oil meeting Ford specification WSE-M2C903-A1.
36. Reconnect the battery ground cable.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control
module relearns its adaptive strategy. The vehicle may need to be driven 16 hen (10 miles) or more to relearn the strategy.
