E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
Blower Motor Resistor: Service and Repair
Blower Motor Resistor
REMOVAL
1. Remove the battery.
WARNING: TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE INJURY, THE AIR BAG SYSTEM BACKUP POWER
SUPPLY MUST BE DEPLETED BEFORE SERVICING ANY CLIMATE CONTROL COMPONENTS. TO DEPLETE THE BACKUP
POWER SUPPLY, DISCONNECT THE BATTERY-TO-STARTER CABLE AND WAIT ONE MINUTE.
2. Remove the battery tray.
a. Remove the screws.
b. Remove the battery tray.
3. Disconnect the heater blower motor switch resistor connector.
4. Remove the heater blower motor switch resistor.
a. Remove the two screws.
b. Remove the heater blower motor switch resistor.
INSTALLATION