E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
Evaporator Case: Service and Repair
Disassembly and Assembly
DISASSEMBLY
1. Remove the blower motor.
a. Remove the blower motor housing tube.
b. Remove the four screws.
c. Remove the retaining clip.
d. Remove the blower motor.
2. Remove the heater blower motor switch resistor.
a. Remove the two screws.
b. Remove the heater blower motor switch resistor.
3. Remove the evaporator cover.
a. Remove the six screws.
b. Remove the four screws.
c. Remove the evaporator cover.
