E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
1. Install the suction accumulator/drier.
a. Install the suction accumulator/drier.
b. Install the screws.
2. Connect the A/C cycling switch electrical connector.
3. Connect the evaporator discharge line.
Install a new green O-ring.
^
Lubricate with clean Motorcraft YN-12b refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B.
Note: The green O-ring(s) cannot be seen. They are located in the connection(s).
Note: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
4. Connect the compressor suction line.
a. Install a new green O-ring.