E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
3. Install a new oil seal in the bore using the (A) Front Hub Remover/Replacer, the (B) Hub Remover Adapters, the (C) Step Plate and the (D) Rear
Axle Seal Replacer, as shown. An alternate method of installing the oil seal is to drive the oil seal into place with the Rear Axle Seal Replacer and
Driver Handle.
NOTE: Make sure the oil seal is not cocked in the bore during installation.
4. Lubricate the cavity between the lips of the wheel bearing seal and the rear wheel bearing with Premium Long-Life Grease XG-1-C or -K or
equivalent meeting Ford specification ESA-M1C75-B.
5. Install the axle shaft.
