E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
3. Use the Safety Belt Bolt Bit to remove the safety belt and tongue bolt.
4. Remove the safety belt and tongue.
5. Use the Safety Belt Bolt Bit to remove the RH rear safety belt and buckle bolt.
6. Remove the RH rear safety belt and buckle.
INSTALLATION
Follow the removal procedure in reverse order.
-
Check the restraint system for proper operation.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
NOTE: Tighten bolts to specification.
