E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
11. Using the (A) O-Ring Tool, remove the direct clutch piston (B) inner and (C) outer seals.
ASSEMBLY
NOTE: Soak the clutch plates for 15 minutes in clean Motorcraft MERCON(R) V Automatic Transmission Fluid XT-5-QM or equivalent.
1. Install the direct clutch piston inner seal.
NOTE: The seal lip must face downward.
2. Install the direct clutch piston outer seal.
NOTE: The seal lip must face downward.
3. Inspect the direct clutch piston check ball.
-
Check for freedom of movement and proper seating.
-
Clean the direct clutch piston with solvent, if necessary.
-
Replace the direct clutch piston, if damaged.
