E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
Parking Pawl: Service and Repair
REMOVAL
1. Remove the extension housing and the extension housing gasket.
2. Remove the (A) bolts and the (B) parking rod guide plate.
3. Remove the (A) parking pawl return spring, the (B) parking pawl and the (C) parking pawl shaft.
INSTALLATION
1. Install the (A) parking pawl shaft, the (B) parking pawl and the (C) parking pawl return spring with the spring end resting on the inside of the case.
2. Install the (A) parking rod guide plate with the (B) bolts.
NOTE: Make sure the dimple on the parking guide support plate is facing inward and the parking pawl actuating rod is in the parking rod support
plate slot.
3. Install the extension housing gasket and the extension housing.