E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
11. Remove the (B) bolts, using an 8 mm socket; the (C) nuts, using a 10 mm socket; and the (D) main control valve body.
NOTE: Do not remove the (A) lower-to-upper main control valve body assembly retaining bolts. Keep the main control valve bodies attached as
an assembly.
12. Remove the (A) bolts, using a Torx bit; (B) nut, using a 10 mm socket; and the (C) solenoid body assembly, by pushing the receptacle downward
to help separate the assembly from the case bore.
13. Remove the solenoid screen assembly by rotating and pulling it.