E 250 3/4 Ton Van V8-5.4L CNG VIN M (1997)
7. Install the (A) solenoid body assembly with (B) nut and the (C) Torx-head bolts finger-tight.
NOTE: Prior to installing the solenoid body assembly, coat the case connector bore with Silicone Brake Caliper Grease and Dielectric Compound
D7AZ-19331-A (Motorcraft WA-10) or equivalent meeting Ford specification ESA-M1C171-A.
8. Install the (A) main control valve body, aligning the (B) manual shift valve with the (C) inner manual valve detent lever. Install the (D) nuts and
the (E) bolts finger-tight.
