E 250 Van L6-300 4.9L (1984)
FIGURE 28
To service the above concerns check the condition and position of the TP sensors connector wiring. If the connector and wiring is found as shown in
Figure 28 perform the following:
1.
Perform EEC IV Quick Test. Service as required.
2.
If the Quick Test indicates a pass, visually inspect the wiring for any deterioration or melting. Service as necessary.
3.
Tie the TP connector wiring to the EEC IV wiring harness as shown in Figure 28.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP9989C84
TIME:
0.6 Hr. DLR. CODING: Basic Part No. 9B989 Code: 95
