ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Other Service Bulletins for Idle Speed: > < Idle Speed - Service Procedures|Page 2426
Page 1
background image

Idle Speed: All Technical Service Bulletins
High Altitude Operation Modifications

Article No. 83-19-18

ALTITUDE MODIFICATION FOR SEA LEVEL CALIBRATIONS - (4.9L) VEHICLES OVER 8500 LB. GVW

LIGHT TRUCKS 1984 E & F SERIES

CALIBRATIONS: 9-77J-R12, 9-77S-R10, 9-78J-R00, 9-78J-R11

These are modifications for subject sea level calibrations over 8500 lb. GVW that will be operated at altitude.

Service modifications for driveability concerns have been developed for sea level calibrated engines which will be principally operated in high altitude
areas (over 4000 feet). The following modifications are allowed:

1.

Remove the PCV valve EV-76 (D8DE-6A666-AA) and replace it with valve EV-77 D8TZ-6A666-A.

2.

Advance the ignition initial timing 4~ from the nominal setting per the procedure outlined in the Truck Shop Manual.

3.

Raise the vehicle.

4.

Remove the transmission vacuum diaphragm attaching bolt, clip and attaching hose.

5.

Remove the production transmission vacuum diaphragm and throttle valve (TV) rod and retain the TV rod. Replace the diaphragm with an altitude
compensating diaphragm, D8AZ-7A377-A, using the retained TV rod.

6.

Re-install the original attaching clip and bolt and torque to specification. Re-install the attaching hose.

7.

Lower the vehicle.

8.

Check the idle and hi-cam speeds and reset to the decal specifications, if necessary.

NOTE:

The customer should retain the removed PCV valve and re-install it If the vehicle is returned to sea level operation. The new transmission
diaphragm is self-compensating for both sea level and altitude and does not need to be removed.

Obtain an Authorized Modifications decal and list the date, dealer number and summary of alterations performed. Select a prominent place adjacent to
the Vehicle Emission Control Information decal suitable for installing the Authorized Modifications decal. Clean the area, install the decal and cover it
with a clear plastic decal shield.
PART NUMBER

PART NAME

CLASS

DBTZ-6A666-A

PCV Valve

A

D8AZ-7A377-A

Altitude Compensating

AM

Diaphragm

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: M
TIME:

"Actual Time" as defined in the Warranty and Policy Manual. DLR. CODING: Basic Part No. DRIVE Code: H7

All Other Service Bulletins for Idle Speed: > < Idle Speed - Service Procedures|Page 2426