E 250 Van V8-351 5.8L (1982)
Marker Lamp: Testing and Inspection
Turn/Stop/Hazard Lamps
Troubleshooting Hints
Hazard Flasher Doesn't Work
-
Check Fuse 8 by operating Stop Lights.
-
Check voltage at Hazard Flasher R/W wire.
-
Replace Hazard Flasher.
-
Check voltage at C315.
-
Replace Turn/Hazard Switch.
Turn Indicators Don't Work
-
Check Fuse 11 by operating Backup Lights.
-
Replace Turn Signal Flasher.
-
Check voltage of Turn Signal Flasher O/Y wire.
-
Repair or replace Turn/Hazard Switch.
No Front Or Rear Lights
-
Check ground points are tight and not corroded.
One Turn Light Not Operating
-
Check for burned-out bulb.
-
Check voltage and ground at bulb socket.
-
Check for frayed or damaged wires.
-
Check that connectors are not corroded.