ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Heater Damper Door - Service Part Information|Page 3334 > < Heater Damper Door - Service Part Information
Page 2
background image

Figure 2

LIGHT TRUCK:

1975-84 ECONOLINE

ISSUE:

The air conditioning/heater damper door and housing assembly to service 1975 through 1984 Econolines are no longer available for service.
A new design air conditioning/heater damper door and housing assembly replaces the old design. The new assembly can be used on older
Econolines if a few minor changes are made.

ACTION:

If service is required on an older Econoline, use the new air conditioning/heater damper door and housing assembly. Refer to the following
procedure for service installation details.

1.

Trim the flange off three (3) sides of the door frame as shown in Figure 1.

2.

Position the template shown in Figure 2 on the door frame.

3.

Drill two (2) holes in the bottom of the door frame for attaching it to the housing assembly.

Heater Damper Door - Service Part Information|Page 3334 > < Heater Damper Door - Service Part Information