E 250 Van V8-460 7.5L (1982)
The new PCM has a new strategy that will use a three-digit self test error code. Figures 5 and 6 list the cross reference between two- and three-digit
codes.
CORE RETURN PROCEDURE
Please refer to the Instruction Sheet included with the new PCM to immediately return the PCM core via the Fedex AWB/Shipper enclosed.
^
For vehicles repaired under warranty, return the core immediately once the Blue FPS700 tag is received. Return the core ASAP to Ford Electronics.
^
For non-warranty vehicles, return the core immediately to Ford Electronics via Fedex AWB/Shipper enclosed.
This is a pilot Federal Express core return program initiated to address return of cores. Dealer must use airbills included in cartons. Use the following
procedure to ship the PCM cores.
SHIPPING PROCEDURE
1.
Take the Fedex airbill and fill in all the sender information in Area 1 - your dealership name and address; you do not need to enter your own Fedex
account number.
2.
On the line immediately below your City/State is a line labeled Your international Billing Reference Information" - you will see pre-printed "DLR
# /Y Shipper # " - you must enter your five-digit dealer code number, then the six-digit "Y" shipper number for this part shipment. DEALER
NUMBER THEN "Y" SHIPPER NUMBER, IN THAT ORDER.
3.
Everything else on the airbill has been completed for you, please do not change anything.
4.
Call Fedex at 1-800-238-5355 to schedule a pickup. Call as early in the day as possible and ask that the Fedex Courier come to the Parts
Department for a pickup. Keep the pink copy of the airbill for your records.
