E 250 Van V8-460 7.5L (1982)
Figure 22 - Fuel System
4.
Remove and discard the fuel line to the carburetor from the vapor separator, carburetor bronze fuel filter and gasket. Then rework the fuel
system (Figure 22) using the parts listed below.
CAUTION: Back-up wrench must be used on fuel filter during assembly.
Hardware required for fuel system rework:
E3TZ-9155-C
Fuel Filter
E5TZ-9C399-A
Fuel Line Assembly
D177-9229-A
Gasket (Fuel Filter to Carb)
