E 250 Van V8-7.3L DSL (1988)
Clutch: Service and Repair
Forward Clutch
DISASSEMBLE
CAUTION: All parts must be handled carefully to avoid nicking or burring the bearing or mating surfaces. Lubricate all internal parts with clean
automatic transmission fluid before assembling them. Do not use any other lubricants except on gaskets and thrust washers. These may be coated with
petroleum jelly to facilitate assembly. Always use new gaskets and seals when assembling transmission.
Removing Clutch Pressure Plate Snap Ring
1. Remove pressure plate snap ring.
Forward Clutch Disassembled
2. Disassemble clutch.