E 250 Van V8-7.3L DSL (1988)
Fluid Pan: Service and Repair
WITH C6
REMOVAL
1. Raise car on hoist or jack stands.
2. Loosen and remove all but two oil pan bolts from front of case and drop rear edge of pan to drain fluid.
3. Remove and clean pan and screen.
4. Remove and discard the nylon shipping plug from the filler tube hole.
INSTALLATION
1. Using new pan gasket, secure pan to case and torque bolts to 8-12 ft lbs.
2. Lower car and fill transmission to the correct level with specified fluid.
