E 250 Van V8-7.3L DSL (1988)
Manual Linkage Adjustment, (1992 Models)
2. Loosen shift rod adjusting nut, as shown in the appropriate Manual Linkage Adjustment image.
3. Place transmission manual lever into Drive position by moving lever completely rearward, then forward two detents.
4. With selector and manual levers in Drive position, torque shift rod adjusting nut to 12-18 ft lbs.
CAUTION: Do not over torque shift rod adjusting nut.
5. Remove weight from the steering column selector lever knob.
6. Operate shift lever in all gear positions to ensure manual lever is in full detent. Adjust lever, if necessary.
