E 250 Van V8-7.3L DSL Turbo VIN F (1995)
Wheel Speed Sensor: Service and Repair
Toothed Ring
Front
REMOVAL
1. Raise vehicle on hoist.
2. Remove wheel and tire assembly.
Rotor And Speed Sensor Ring
3. Remove caliper, rotor and hub assemblies.
Speed Sensor Ring Removal
4. Using a 3-jaw puller, D80L-1013-A or equivalent, remove speed sensor ring from hub.
CAUTION: Discard old speed sensor ring after removal. Do not reuse.
INSTALLATION
1. Support center of hub so that wheel studs do not rest on work surface.
CAUTION: When performing the following step, make sure indicator ring is pressed on straight.