E 250 Van V8-7.3L DSL Turbo VIN F (1995)
Wheel Cylinder: Testing and Inspection
NOTE: If dirt is found in any part of the hydraulic system, flush the entire system with clean isopropyl alcohol.
1. Clean all brake cylinder parts in clean isopropyl alcohol or use the Rotunda Brake Parts Washer model 065-00016 or equivalent.
2. Inspect all parts for wear or damage. Check the cylinder bore for rust, scores or other damage.
3. Be sure the bleeder screw passage is clean and open.
4. Replace all parts that are worn or damaged.
