E 250 Van V8-7.3L DSL Turbo VIN F (1995)
Fluid - A/T: Testing and Inspection
With E4OD
FLUID CHECK
NOTE: The automatic transmission is designed to operate with the fluid level between the Add and Full mark on the dipstick at an operating
temperature of 150° F - 170° F.
1. With transmission in Park, engine at curb idle RPM, foot brake applied, and vehicle on level surface, move transmission selector lever through
each range.
2. Allow time in each range to engage transmission, then return selector to Park.
3. Apply parking brake.
NOTE: Do not turn off engine during the fluid level check.
4. Remove dipstick from filler tube, wipe clean, and push dipstick back into tube. Ensure it is fully seated.
5. Remove dipstick from filler tube and check fluid level. Fluid level should be between Add and Full mark.
6. If necessary, add enough fluid through filler tube to raise level to correct position.
NOTE: Do not overfill.