E 250 Van V8-7.3L DSL Turbo VIN F (1995)
High pressure pumps with oil leaks at the fittings for the high pressure lines and the lugs at the rear can be repaired in the field using the following Ford
part number 2C3Z-9G804-AA kit per TSB 03-17-01. This kit contains 3 o-rings, sealant, instructions on how to clean and seal the fittings. Torque specs.
for the fittings are also included.
Note: Threads must be cleaned, sealant applied to the first 3 threads ad the fittings and plug tightened to proper specs.
Pump Operation
The IPR acts to increase ICP by restricting the path to drain.
