E 250 Van V8-7.3L DSL Turbo VIN F (1995)
8. If the rear seat shoulder strap opening bezel is damaged, it can be removed from the rear safety belt retractor and tongue by carefully cutting
through the slot located on the back side of the rear seat shoulder strap opening bezel.
-
To prevent damage to the safety belt webbing when cutting through the slot in the rear seat shoulder strap opening bezel, place a smooth, flat,
hard object such as a metal ruler between the webbing and the back side of the belt loop.
9. For installation, follow the removal procedure in reverse order. Tighten all anchor bolts to 30-40 Nm (22-29 lb-ft). Check restraint system for
proper operation.
