E 250 Van V8-7.3L DSL Turbo VIN F (1995)
Exploded View Of Intermediate/Overdrive Cylinder
NOTE: Refer to the Exploded View Of Intermediate/Overdrive Cylinder image when performing the following procedure.
Overdrive Return Spring Compression
1. Compress overdrive return spring as shown in the Overdrive Return Spring Compression image.
2. Remove snap ring, compressor tool assembly, and return spring.
3. Remove overdrive piston, outer and inner seals, and intermediate piston.
4. Remove intermediate/overdrive inner seal from cylinder bore.
5. Remove outer seal from intermediate piston.
INSTALLATION
1. Reverse procedure to install, noting the following: