E 350 V10-6.8L (2007)
Rear Door Interior Handle: Service and Repair
Interior Door Handle - Side and Rear, Double Latch
INTERIOR DOOR HANDLE - SIDE AND REAR, DOUBLE LATCH
Special Tool(s)
Special Tool(s)
Removal and Installation
1. If equipped, remove the door trim panel.
2. Release the actuating cable by pushing the bottom keeper of the clips upward and sliding the clips toward the outside of the door.
3. Disconnect the actuating cables.
4. NOTE: Use the special tool to install the latch remote control rivet.
Remove the 2 rivets and the interior door handle.
5. To install, reverse the removal procedure.
