E 350 V10-6.8L (2007)
Trim Panel: Service and Repair
Quarter Trim Panel - LH
QUARTER TRIM PANEL - LH
Removal and Installation
1. Remove the rear seats to access the quarter trim panels.
2. Remove the body side trim finish panel.
1. Remove the 3 pin-type retainers.
2. Remove the finish panel from the body side.
3. If equipped, disconnect the powerpoint electrical connector.
4. Remove the rear seat belt shoulder strap opening covers.
-
Pry the seat belt shoulder strap covers from the upper trim panels.
5. Pull the rear door weatherstrip off at the rear door opening to access the trim panel pin-type retainers.
6. Remove the rear upper body side trim panel (extended wagon shown).
1. Remove the screw.
2. Remove the 3 pin-type retainers.
3. Remove the rear upper body side trim panel.