E 350 V10-6.8L (2007)
4. Remove the rear seat belt shoulder strap covers.
-
Pry the seat belt shoulder strap covers upward from the upper trim panels.
5. Remove the window latches, if so equipped.
1. Remove the 2 window latch screw (1 shown).
2. Remove the window latch.
6. Remove the safety belt guide (extended wagon).
1. Lift the safety belt guide cover.
2. Using the special tool, remove the bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
3. Remove the safety belt guide.
7. Remove the safety belt retractor cover (extended wagon).